Maintenance and precautions of hydraulic press

Hydraulic press is a common industrial equipment with a wide range of applications; In order to ensure the normal operation and prolong the service life of the hydraulic press you purchased, the technical team of Jianlong Hydraulic Technology has compiled maintenance and precautions for the hydraulic press for your reference and use.

1. Regularly check hydraulic oil: Regularly check the quality and level of hydraulic oil in the hydraulic press. Ensure that the hydraulic oil is clean, free of impurities, and meets the specified viscosity and performance requirements. Timely replace aged or contaminated hydraulic oil; If the oil is found to be emulsified, opaque, or has a gelatinous sticking phenomenon, the oil should be changed immediately.

2. Cleaning and maintenance: Keep the hydraulic press clean and tidy, especially the hydraulic system and the parts in close contact. Regularly clean dust, oil stains, and other debris to prevent them from entering the hydraulic system and affecting normal operation.

3. Lubrication and maintenance: Regularly lubricate and maintain various lubrication points of the hydraulic press to ensure sufficient lubricating oil and normal operation. At the same time, check and tighten the bolts and connectors of the equipment to ensure that they are in good condition.

4. Check and replace seals: Regularly inspect the seals of the hydraulic press, such as piston seals, oil seals, etc. If damage, aging, or leakage is found, replace the seals in a timely manner to avoid oil leakage and performance degradation of the hydraulic system.

5. Pay attention to the working environment: Keep the working environment of the hydraulic press clean, dry, and well ventilated, and avoid damage to the equipment caused by dust, moisture, or corrosive gases.

6. Operating standards: When operating the hydraulic press, follow the operating standards and safety guidelines of the equipment. Avoid overloading or prolonged continuous operation to prevent equipment from overheating or damage.

7. Regular maintenance: According to the frequency of use and working conditions of the hydraulic press, regular maintenance and upkeep should be carried out, such as replacing filters, adjusting hydraulic system parameters, etc.

Please note that the above are general maintenance and precautions. Specific hydraulic press maintenance should be carried out according to the equipment model and manufacturer's recommendations. It is recommended to refer to the user manual/instruction manual and technical support of the hydraulic press to ensure correct maintenance measures and operating procedures. If you have any needs or questions about hydraulic press maintenance, please feel free to let us know and we welcome your visit!