Hydraulic press solenoid valve connection and hydraulic system precautions?

Hydraulic press, this is the website products and keywords, so it is necessary to learn and understand the product, because only in this way, you can know how to correctly and reasonably use the product, so as to surface problems such as wrong use, at the same time, you can also increase your knowledge in this area.

1. Hydraulic machine online purchase, its product price should be taken into account?

Hydraulic machine online purchase, that is, the product is purchased on the industry website, then, from a point of view, there are some relevant considerations. Moreover, as long as it is related to the purchase of products, it is an important and necessary consideration, and among these factors, it includes the factor of product price, so based on this point, it can be known that the answer to this question is yes.

2. How to connect the connection switch of the electromagnetic reversing valve in the hydraulic press?

The electromagnetic reversing valve in the hydraulic press, if it is connected with the wiring switch, the specific operation is: there are generally three wires in the electromagnetic reversing valve, but only two wires are used, and the specific value of the voltage should be looked at. Generally speaking, there is a light inside the plug, so the two wires only need to be connected to the two terminals of the lamp, which can achieve the purpose.

3. Are there any precautions for the hydraulic system of the hydraulic press? How does it use the power generated by the hydraulic pump to work?

Hydraulic press hydraulic system, it can be said that this is an important part, is not to be despised and careless treatment. In the process of using it, there are some precautions, so it can be known that the answer to question one is yes. Among these precautions, one of the more important points is to avoid having debris or foreign bodies in the hydraulic oil, to have clean hydraulic oil, and to have good heat dissipation.

Hydraulic press, which uses the power generated by the hydraulic pump to work, which is specifically: the hydraulic oil enters the hydraulic cylinder through the voltage pump, and the parts in the cylinder cooperate and act on each other, so that the oil cloth is exposed. After that, the hydraulic oil circulates through the tank through a valve. Therefore, through the dynamics, the hydraulic press itself in the operation process to achieve the purpose of self-operation and work.

Counterweight block four-column hydraulic press