Cutting hydraulic press guide and troubleshooting tips

Cutting hydraulic press guide and troubleshooting tips

In the modern manufacturing industry, cutting hydraulic press as one of the important processing equipment, 

widely used in metal processing, sheet metal forming and other industries, is also our best-selling products. 

In order to help users better grasp the use of edge cutting hydraulic press skills, improve production efficiency, 

our company hereby issues the use of edge cutting hydraulic press guide and troubleshooting skills.

Ⅰ. First, the use of edge cutting hydraulic press guide

1. Equipment inspection:

Before each use, check the oil level of the hydraulic oil to ensure that it is within the normal range.

Check whether the power supply, switch, and cable connections are secure to avoid device failures caused by circuit 

problems.

2. Operation steps:

Before starting the hydraulic press, ensure that the working area is clean and free of debris.

Set the desired trimming thickness and pressure according to the operating manual.

Place the material to be processed on the cutting machine work table to ensure that the material is firmly fixed.

Start the hydraulic press, slowly cut the edge operation, observe the cutting effect.

3. Safety precautions:

Do not place hands or other objects near the cutting edge area during operation.

Perform regular maintenance on the equipment to keep the hydraulic system clean.

Ⅱ. Second, troubleshooting skills

When using a trimming hydraulic press, you may encounter some common faults. Here are some problems and 

how to troubleshoot them:

1. Hydraulic system oil leakage:

Check whether the hydraulic tubing and joints are loose or damaged, and replace them in time.

Check whether the hydraulic cylinder seal ring is aging, and replace it if necessary.

2. Uneven cutting edge:

Check edge cutting tools for wear and if necessary, trim or replace them.

Ensure that the material is positioned properly during trimming to avoid displacement.

3. Hydraulic press no response:

Check whether the power supply is normal and ensure that the power switch is on.

Check the Settings of the control panel and ensure that the operation parameters are correct.

4. Lack of pressure:

Check whether the hydraulic oil is sufficient, and replenish the hydraulic oil if necessary.

Check whether the safety valve is working properly and ensure that the pressure setting meets the requirements.

Cutting hydraulic press as a key production equipment, reasonable use and timely troubleshooting is to ensure the 

smooth production of the premise. Jianlong Hydraulic Machinery is always committed to providing customers with 

better products and services, if you have any questions or need further technical support, please feel free to contact

 us.