Three knowledge points of single column hydraulic press are briefly introduced

In the single column hydraulic press I believe that everyone knows something, but there are three questions about the single column hydraulic press, do you know the answer?

What are the preparations for the work of a single column hydraulic press?

1. Hydraulic press operators must be trained to master equipment performance and operation technology before they can operate independently.

2. Before operation, all kinds of debris on the mold should be cleaned and any dirt on the hydraulic press rod should be wiped.

3. The hydraulic press installation mold must be carried out in the case of power failure, and it is forbidden to collide with the start button, handle and foot on the foot switch.

4. Install the upper and lower mold alignment, adjust the mold gap, do not allow unilateral deviation from the center, confirm that the mold is fixed and then test the pressure.

5. Before the hydraulic press works, start the equipment idling for 5 minutes, and check whether the oil tank level is enough, whether the oil pump sound is normal, whether the hydraulic unit and the pipeline, the joint, and the piston have leakage phenomenon.

Where is the advantage of single column hydraulic press displayed?

1. It has the characteristics of good structural rigidity, good guiding performance and fast speed.

2. Convenient manual adjustment mechanism can adjust the pressure head or the upper table in any position in the stroke, but also can adjust the fast forward and the length of the process in the design stroke;

3. The solid open structure of the whole welding allows the fuselage to maintain enough rigidity while having the most convenient operating space.

Here we introduce the three characteristics of a single column hydraulic press:

1. The solid open structure of the single-column hydraulic press welded as a whole can make the fuselage maintain enough rigidity while having the most convenient operating space.

2. Single column hydraulic press has the characteristics of good structural rigidity, good guiding performance, fast speed and so on.

3. The convenient manual adjustment mechanism of the single-column hydraulic press can adjust the press head or the upper table at any position in the stroke, and can also adjust the fast forward and the length of the work process within the design stroke.

Four column press