How to adjust the trimming machine

The specific steps and methods for adjusting the trimming machine  depend on the type of trimming machine and processing requirements. Here are some common steps and methods to adjust the trimming machine:

Tool adjustment. Adjust the height and tilt Angle of the tool to ensure proper contact with the workpiece surface, but not excessive wear. According to the processing requirements, the appropriate tool is selected and assembled on the machine.

Positioning adjustment. Adjust the workpiece positioning device to ensure that the position of the workpiece is fixed and consistent with the direction of tool movement. Adjust the machining height and speed of the workpiece as needed to optimize the machining effect.

Oil and electrical regulation. For hydraulic or pneumatic systems, ensure that the oil circuit or pneumatic system is stable and there is no oil leakage or gas leakage. Adjust the electrical system to ensure the normal operation of each electrical component, and adjust the current, voltage and frequency parameters appropriately.

Cut width and height adjustment. Use special screws to adjust the width of the cutting knife to ensure that the gap between the two blades is appropriate. Adjust the setting screw of the lower blade and change the height of the blade to achieve the appropriate cutting depth.

Feeding device adjustment. Adjust the pressure of the feeding wheel to ensure that the material enters and leaves the machine smoothly. Adjust the speed of the feed wheel and feeder as needed.

Speed adjustment. Depending on the material processed (such as hardness or thickness), the motor speed is manually or automatically adjusted to achieve the best cutting results.

Cleaning and maintenance. Keep machine clean, remove debris and chips in time. Check the operation of all parts of the machine regularly and carry out necessary maintenance.

Back knife adjustment. For infrared trimming machines, the position, height and horizontal position of the return knife need to be specially adjusted to ensure that the cutting line is neat and smooth.